Power TVS MAXPak Series
MDE Power TVS MAXPak Series are high current bidirectional Transient Voltage Suppressor (TVS) diodes with up to 288,000 watts of power. This series of silicone avalanche diode is designed for use in AC line protection and high power DC bus clamping applications.
These devices offer bidirectional port protection from 50 volts to 470 volts, and are RoHS and UL Recognized while also meeting IEC 61000-4-5 8/20 μs current surge requirements. Plus, the silicone avalanche diode series also meet MIL-STD 1275 requirements.
The use of silicon technology in the Power TVS MAXPak Series offers lower clamping voltage under surge compared to competing MOV technology.
The devices are provided in through-hole packages and meet industry standard requirements such as RoHS and Pb Free solder reflow profiles.
Power TVS MAX -20 / 40 Series
MDE Power TVS MAX-20 / 40 Series high current bidirectional Transient Voltage Suppressor (TVS) diodes with up to 40,000 watts of power are designed for RTCA /DO-160 rating for Airborne Equipment Application..
These devices offer bidirectional protection from 5.0 volts to 150 volts, and are RoHS compliant and UL Recognized. They also meet MIL-STD 1275 requirements.
The use of silicon technology in the Power MAX-20 / 40 Series offer lower clamping voltage under surge compared to competing MOV technology.
The devices are provided in both through-hole packages and CELL packages and meet industry standard requirements such as RoHS and Pb Free solder reflow profiles.
TVS Diode Series
Our Transient Voltage Suppression(TVS) Devices are designed specifically for the protection of electronic systems from the destructive effects of Lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), and Inductive Switching. All silicon devices are constructed with our famous low leakage glass passivation process with high-energy absorption capability from 400 watts up to 100 ,000 watts. Breakdown Voltages start at 5.0 voltages up to 400 volts.
These devices are UL Recognized components.
Two Terminal Thyristor
The P Series is designed for the Telecommunication Industry. These products Provide Protection in Accordance with FCC Part 68, UL 1459, Bellcore 1089. ITU-TK, 20& K. 21
Metal Oxide Varistors MOV Series
MDE High Energy Metal Oxide Varistors “D” & “S” Series The High Energy Series large tab-leaded varistors are designed to handle high peak currents and have the ability to absorb large amounts of energy. Available in round (D) and square (S) shapes to allow mounting in various spaces and in bare disc form intended for special applications requiring unique electrical contact or packaging methods provided by the customer. The electrode finish of these devices is solderable and can be used with pressure contacts. Bare Disc Products are also available for certain applications where discs of the same diameter may be stacked.
This Series is available in 40D (40mm), and 53D (53mm) single disc configuration. with the single square available in 34S (34mm) configurations. The maximum peak current capabilities range from 18,000 Amps to 70,000 Amps. Varistor voltages range from 130 volts to 1,400 volts.
Thermally Protected MOV
Surge Protective Device with Thermal Protection designed to open in the event of overheating due to an abnormal over-voltage, with High Fault Current. Approved to UL1449 3rd Edition on File E337840
Surge Protective Device with Thermal Protection designed to open in the event of overheating due to an abnormal over-voltage, with High Fault Current.
Custom Assemblies using MAX-20 / 40 Series
Built to customer specific designs for board level SPD.
Custom Assemblies are available using MAX20 Series 20KW Diodes stacked and configured to achieve customer unique voltage, power, or packaging requirements.